Flexible press line for glulam beams and boards

The Duo 80 press line gives you a unique opportunity to produce glulam beams and boards in the same production line. In this press line the products can be up to 6 meters long.

The Duo 80 press line is developed with a glue system that can add glue to the top and to the side of the lamstock – either for small beam or board production. This makes it possible to have a wider selection of products and increased capacity without needing additional space.

The press uses radio frequency energy, which means a rapid curing of the glue and thus shorter press cycles and increased capacity.

Read more about our radio frequency technology and the benefits of using radio frequency.

See our system solutions for scantlings, posts, and beams

1

Glue application

The flexible glue application system applies glue from the top (with glue nozzles for beam production) and from the side (with glue roller for board production).

After the glue application, the lamellas are packed and lowered onto the feeding table that leads the entire charge to the press.

2

The Press

The press in this plant is a radio frequency press. It is equipped with a high performing and very reliable radio frequency generator that generates 100 kW. The press is fitted with a number of power regulators that adjust the supplied power to ensure perfect curing of the glue.

The press is fitted with side pressure and top pressure cylinders, to guarantee a uniform and high quality pressing of boards and beams.

3

Saw and stacker

As in this case, a cross saw can be installed after the press, cutting the ends of the beams/boards, and sawing the boards into desired lengths.

Furthermore, a stacker can be installed to handle the boards and beams – either for palletizing or for further processing.

Specifications

The minimum and maximum length, width and height are listed below – but we can make a press line that specifically fits your products and production needs.

Glulam

Height: 30 – 135 mm (1.2 – 5.3 in)

Width: 60 – 1,280 mm (2.4 in – 4 ft 2 in)

Length: 1,000 – 6,100 mm (3 ft 3 in – 20 ft)

Boards

Height: 15 – 50 mm (0.6 – 2 in)

Width: 60 – 1,280 mm (2.4 in – 4 ft 2 in)

Length: 1,000 – 6,100 mm (3 ft 3 in – 20 ft)

Contact

We are ready to help you find the right press solution

Kristian Kallesøe

Sales Manager

kk@kallesoe-as.dk

Jens Therkildsen

Sales Manager

jt@kallesoe-as.dk

References in the scantling, post, and beam industry

© Kallesoe Machinery A/S

You're using an old browser

Ohh no… We're sorry, but you are using a browser that is too old to show you everything that this site is capable of. What a shame.

Instead, we recommend that you use one of the browsers mentioned below.

Thank you, for your understanding.

(Not recommended)